m

Our Mission Statement

This is Photoshop's version of Loremer Ipsn gravida nibh vel velit auctoregorie sam alquet.Aenean sollicitudin, lorem quis bibendum auci elit consequat ipsutis sem nibh id elit.

Contact Us

  • 1-779-333-67992
  • info@industrybusiness.com
  • 3042 Rotterdam, Netherlands; Van Noortwijcksingel
Hours: 8:00 - 5:00
Saturday and Sunday - CLOSED
Facility: Pennsylvania
1651 Loretta Ave, Feasterville-Trevose, PA 19053
Follow Us:
Top
 

Facilities Lists

ARC Manufacturing continuously invests in new equipment

ARC Manufacturing operates out of a 27,000 square foot air-conditioned building in Lower Bucks Co., just outside of Northeast Philadelphia, PA. Indoor truck bay is in front of the shop, and outside dock and yard is in the back. ARC has two 5-ton overhead cranes, one 10-ton overhead crane, and a 4,000 lb. capacity forklift. We also have a 1.5 ton truck for local pickup and delivery. Just as we have always taken pride in our employees, we also take pride in the equipment we use listed below.

Integrated Machining Centers

Integrated Machining Centers combine CNC turning and CNC milling into one operation that increases efficiency, quality, and consistency with less set-ups and workpiece handling.

Mazak Integrex 400 IV S 29” diam. x 61’L machining cap., dual 15” chucks, KM63 tooling, Mazatrol Matrix Control
Mazak Integrex 35 22.5” diam. x 60” L machining cap., KM63 and CAT40 tooling, Mazatrol T-Plus Control
Mazak MTN-900 V.T.L. *NEW* 36″ diam. x 30″H turning cap., Mazatrol Matrix Control (not full C-axis)
CNC Turning Centers

Our CNC turning equipment are proven, high quality, and reliable machines. Close tolerance runouts and roundness with superior finishes are the norm for these machines.

Mazak MTN-1600 V.T.L. *NEW* 64″ diam. x 35″H turning cap., Mazatrol Matrix Control1
Mazak Quick Turn 250 CNC Lathe 24” swing x 72” L turning cap., CNC steady rest, Mazatrol Matrix Control
Mazak QTN-100 IIP CNC Lathe 20″ swing x 24″L turning cap., Mazatrol Matrix Control
Mazak Quick Turn 30 CNC Lathe 20” swing x 39.4” L turning cap., Mazatrol PC-Fusion 640T Control
HES Model 32 CNC Lathe 32” swing x 133” L turning cap., steady rest, Allen-Bradley 9-Series Control
HES Model 500 CNC Lathe 20” swing x 60” L turning cap., Fanuc 10TA CNC Control
HES Model 24 CNC Lathe 24” swing x 64” L turning cap., steady and follow rests, Dipath CNC Control
(2) Wasino Model LG-71 CNC Lathes CNC chucking lathes w/ high speed gang tool package, Fanuc 3T Control
CNC Milling Centers

Our CNC Milling Centers enable us to be versatile and precise in our milling operations.

Mazak HCN-8800 Horizontal Mill *NEW* Dual 32″x 32″ pallets, CAT50 spindle, Renishaw Probe, Mazatrol Matrix Control
Mitsubishi H60En Horizontal Mill Dual 24” x 24” pallets, 50 taper spindle, 4 th axis table, Fanuc 18i Control
Mitsui-Seiki HS4A Horizontal Mil Dual pallets, 50 taper spindle, 4 th axis table, Fanuc 11M Control
Mitsubishi M-V60C Vertical Mill 23.6” x 55” table, 50 taper spindle, high precision, Meldas 335M Control
Makino FNC 125-24 Vertical Mill 79” x 28” table, 50 taper spindle, Fanuc 3000 CNC Control
Wire EDM Equipment
Agie Charmilles FI 440 CCS EDM *NEW* 21.5”x 13.7”x 15.7”H cap., up to 30 deg. taper, glass scales, automatic re-thread
Charmilles Robofil 510 CNC EDM 27.5” x 18.0” x 15.75”H cap., up to 30 deg. taper, glass scales, automatic re-thread
Mitsubishi DWC90HI CNC EDM 9.8” x 11.8” x 6.2”H cap., up to 12 deg. taper, laser control position correction
Manual Lathes
Okuma LT Manual Lathe 27” swing x 13 ft. between centers, digital readout, steady and follow rests
(2) HES 550 Engine Lathes 20” swing x 64” between centers, steady and follow rests
HES 435 Tracer Lathe 16” swing x 60” between centers, steady and follow rests, hydraulic tracer attachment
Weiler Matador VSI Manual Lathe 11” swing x 24” between centers, tool room lathe
Manual Milling Equipment
Cincinatti No.6 Horizontal Mill 20” x 104” table capacity, 50 taper spindle, vertical milling attachment
Cincinatti No.4 Horizontal Mill 16” x 68” table capacity, 50 taper spindle, vertical milling attachment
Enshu No.2 Horizontal Mill 15” x 43” table capacity, 15HP drive, dividing attachment, horizontal mill
Enshu No.2 Vertical Mill 15” x 43” table capacity, 15HP drive, dividing attachmnet , vertical mill
Hitachi #3MV Knee-Type Vert. Mill 14” x 34” table capacity with 19” vertical travel, 50 taper spindle
(4) Bridgeport Manual Mills Vertical knee-type mills with right angle attachments, DRO’s, indexing tables, etc.
(2) Deckel FPI Universal Man. Mills Manual universal precision mills with indexing heads and accessories
Inspection Equipment
Mitutoyo CV-3100H4 Contour Tracer *NEW* tracer range X = 3.9″ x Z = 1.9″, with .05um resolution in X , .02um in Z
Mitutoyo BHN710 CMM 28” x 40” x 24”H measuring cap., Mcosmos C-1 software, Dell Optiplex 755 PC
Brown & Sharpe MicroHite CMM 17” x 19” x 15.5”H measuring cap., PC-DMIS software, HP 5100 PC w/ RAM upgrade
Jones & Lamson Optical Comparator 30” diam. view, 10x and 31.25x magnification
Sherr-Tumico Optical Comparator 14” diam. view with 10x magnification
Hewlett-Packard 5501A Laser measures lengths up to 116” with accuracy within .00005”, temp. compensation
Wilson 4JR Hardness Tester Rockwell ‘B’ and ‘C’ scale with reference standards
Sunnen and Mitutoyo Bore Gages Full set of boregages from .250” to 12.000” diameter range with setting mic fixtures
GAGEpack EZ 8.5 Calibration software used for ARC’s gages which are calibrated at regular intervals
Miscellaneous: Arc has a full range of mic sets from 0-1” up to 36” and calipers from 0-6” up to 108”. We have (12) surface plates from 16”x24” to 48”x72”, height stands, Indi-Square, Mueller gages from 6-12” range up to 48”, (2) 81 pc. carbide gage block sets, etc.
Programming and Computer Equipment
Gibbs CAM 2006 CAD/CAM programming for turning with solid modeling
Camsoft AS3000 CAD/CAM programming for milling with solid modeling
Mastercam X4 CAD/CAM multi-axis programming with solid modeling
(2) Dell XPS Computers Dell PC’s with high performance graphics package for CNC programming software
JobBoss Software Manages each job from quote to order to shop router and shipping, tracks purchases and outside vendor operations, implements quality control procedures and documents,and provides data for future quotes and planning
(6) Nexlink Custom PC’s 230 GB w/ backup drives and dual-core processors on ethernet network w/ Jobboss
Dell Dimension 1100 PC w/Gagepack software, Word and Excel for inspection reports, Canon Digital Cam port
(3) Dell Dimension Computers 100GB w/ backup drive, DSL internet , (1) HP Designjet 100 ‘D’ size plotter
Miscellaneous Equipment
Air Products 300 AMP Welder AC/DC welder with adjustable start, control switch, water cooled
K.O Lee Cutter Grinder Tool grinder with accessories and indexing head
Do-All 3612-H Bandsaw Vertical bandsaw with contour feed attachment
Do-All C-9 AV Bandsaw Cutoff saw with 12”x 12” cut cap. and automatic bar feed for up to 12’ lengths
Empire Sandblast Cabinet 20”x 20”x 35” cabinet with reclaimer for glass beading (stainless steel only)
Sunnen Model 1600 Honing Machine Precision honing with mandrels and attachments for up to 3” diameter